The two rooms in our homes that we always want to look, smell and feel as clean as possible are our kitchen and our bathroom. And being that those rooms just happen to also be two high-traffic places where the flooring usually consists of tile, it’s important that you do all that you do all that you can, not just to keep your tile sparkling clean, but the grout that outlines it clean as well. If you’ve been looking for some tips on how to clean and remove stains from your tile, you’re in luck. No matter what condition you grout is in, we’ve got some suggestions to get it looking great in no time below:
If it’s lightly-stained grout: If you’re someone who makes a point to clean your grout on a pretty consistent basis, you’re probably going to have lightly-stained grout. In most cases, all that you need to do to clean it is to apply a solution of one-part bleach and one-part water to your floor, allow it to penetrate for about 15 minutes and then brush it with a nylon brush. Then, rinse the floor thoroughly with clean water and the grout should be looking as good as new.
If it’s deeply-stained grout: On the other hand, if your grout has deep-rooted stains within it, you might need some other tools. One of our favorites is something that is known as a grout grabber, which basically grinds into the grout in order to get out the stains. There are other options that you can choose from as well. One website that offers a list of them is Do It Yourself. Just go to the site and put “five grout removal tools” in the search field.
If it’s new tile and grout: One of the best ways to keep grout from getting stained in the first place is by taking preventative measures; especially when it comes to any new tile and grout that you might have in one the rooms of your home. A very effective solution to keeping your grout clean is to apply some grout sealant to your floors. Just make sure that in using some that you follow the directions thoroughly and that you make a point to apply the solution to the grout only. According to many home contractors, it’s best to use sealant about 10-14 days after your grout cures. Lowe’s or Home Depot can recommend a brand that will be just right for you.
If you prefer alternative cleaners: There are a lot of people who would prefer not to use commercial products because they tend to have a lot of chemicals in them that include toxins and fumes. That’s why when it comes to cleaning their carpet, some people like to use vinegar or dishwashing liquid instead of Chem-Dry. And when it comes to cleaning grout, there are also many individuals who are opting for grout solutions like one-part hydrogen peroxide with one-part water or a combination of baking soda and vinegar. For more information on other natural recipes for cleaning grout, go to your favorite search engine and put “homemade recipes for cleaning grout” in the search field.
If you don’t want to do it yourself: If getting down on the floor to remove grout stains is something that you want to avoid doing at all costs, there are professional companies that will come to your home and do it for you. What they tend to do is use a steam machine. It’s quick, it’s professional and it only takes a few moments to do. For information on professional grout cleaning companies within your area, visit GroutDoctor.com.